! USE JAF ONLY !
INSTALLING AND SETTING UP JAF.
1. Download this file [ click here ]
[It Include All File You Need]
2. UNRAR the file to your desktop
3. open the folder
4. install JAFSetup_1.98.62.exe
5. install JAF to the default location
Note: you only have to do "this" if you are using Vista, Windows 2003/2008 server. or Windows 7
Code:
A. Right click on "OGM_JAF_PKEY_ Emulator_v 5.exe"
B. scroll down to "Properties", left click on "Properties"
C. Left click the "Compatibility" at the top of the popup window.
D. "CHECK" run this program in "Compatibility" mode.
E. In the select box. select "Windows XP" or Windows XP SP?
F. left click "APPLY", then left click "OK".
! GETTING YOUR FIRMWARE FOR FLASHING !
<1> go to "C:\Program Files\Nokia".
<2> create a folder called "Phoenix" C:\Program Files\Nokia\Phoenix.
<3> open C:\Program Files\Nokia \Phoenix.
<4> create a folder called "Products" C:\Program Files\Nokia\Phoenix \Products
<5> open C:\Program Files\Nokia \Phoenix\Products.
<6> create a folder with phones ROM VERSION RM-xxx, C:\Program Files \Nokia\Phoenix\Products\RM-xxx.
<7> open C:\Program Files\Nokia \Phoenix\Products\RM-xxx, leave it open. xxx - your Rm version.
<8> GO HERE [ click here ]
to download your firmware or by using "navifirm.exe".
<11> save your firmware to C: \Program Files\Nokia\Phoenix \Products\RM-xxx Note: RM-xxx will be different depending on your country or region (IE, RM-505, RM-555, etc...).
! USING JAF TO INSTALL COOKED FIRMWARE !
12)Install Nokia pc suite if you dont have it installed already (Cable Drivers Are installed with them and needed).
1. from main "jaf" folder.
2.click on "OGM_JAF_PKEY_Emulator_ v 5.exe" then Click on special r/d then Go.
4. JAF gets loaded.
6. in JAF left click the BB5 tab.
7. under "Flash Settings"...
A. uncheck "CRT 308".
B. check "Manual Flash" "Dead USB".
C. check "Normal Mode".
D. check "Use INI".
8. Wait for INI popup window to open. [Then a list will appear containing all phone models like the picture below].
9. scroll down to your USB FIRMWARE CABLE TYPE.
10. Select firmware type (RM-???) If JAF doesn't find the RM-xxx, just add the following two lines to the end of the file jaf_nok4models.ini (normally found in C:\Program Files \ODEON\JAF\): Code: [RM-xxx]Description=Nokia X6 CABLE [RM-XXX Write your RM version in xxx , write your phone model replacing nokia x6] Note RM-??? will be your country or region type.
11. left click "OK".
12. your FIRMWARE FILES ARE SETUP AND LOADED READY FOR FLASHING BY JAF.
13. Turn Off Your Phone connect it to your pc.
14. in the "Operations Box", left click on "FLASH" [Then Click YES when a dialog appears like on the picture below].
15. then Jaf will ask for turn on your phone click turn on [Now Just press the Power Button on your phone a little (just for about 1 second)].
15. Wait for JAF to start flashing.
16. after flash complete your phone will auto start.
! UNLOCKING NOKIA BB5 PHONES !
THIS WILL WORK FOR ALL THE NOKIA BB5 HANDSETS like NOKIA 6120c, NOKIA 5700, NOKIA 6300, NOKIA 6630, and many otherS. Download Nemesis Service Suite (NSS103812.exe) from here http://4shared.com (12.27MB) CONNECT UR FONE VIA USB CABLE IN PC MODE & INSTALL THE DRIVERS FOR UR CELL FONE PROVIDED WITH NOKIA PC SUITE.THEN EXIT PC SUITE THEN INSTALL Nemesis Service Suite downloaded from the above site SELECT USB VIRTUAL DRIVE during installation (in case of nokia 6120c for nokia 5700 use diamond protection) AFTER INSTALLATION OPEN IT THEN CLicK ON SCAN BUTTON AFTER THAT CLicK ON PHONE INFO NOW CLicK ON SCAN NOW CLicK ON PERMANENT MEMORY TAB given on right bottom of application NOW CLicK ON READ IT WILL READ THE PERMANENT MEMORY FILE & WRITE IT TO THE DISK UR PM FILE WILL BE LOCATED IN THE PATH: D:\Program Files\NSS \Backup\pm \35*********.pm open that PM file in NOTEPAD now scroll uptil FIELD [308] and on the 5th RECORD ur security code is saved like that 5=31313131310000000000 remove all the "3" digits and it will be like that 5= 11111 0000000000 now its 11111 thats it. You code is 11111.

Ring ring